Mentor Graphics

Sporazum Mentor Graphics-a z EDMD Solutions

za distribucijo izdelkov za Elektronsko načrtovanje in Analizo

Wilsonville, Ore., 6. marec, 2015. - Mentor Graphics Corporation (NASDAQ: MENT) je danes napovedala dogovor z EDMD Solutions, članom Skupine CADCAM, vodilnim distributerjem orodij za električni dizajn, mehanski dizajn ter analizo v Jugovzhodni Evropi, za distribucijo izdelkov za PCB dizajn, analizo električne zmogljivosti in mehansko analizo, strankam s področja elektronike v regiji.  Ti izdelki, vzeti iz bogatega portfelja korporacije Mentor Graphics, strankam zagotavljajo uporabo, svetovno vodilnega, orodja za dizajn tiskanega vezja , analizo zmogljivosti vezja, dizajniranje tiskanega vezja primernega za proizvodnjo (DFM) in termično analiziranje. Kupci EDMD imajo sedaj dostop do zmogljivih aplikacij podjetja Mentor Graphics, ki jim omogočajo višjo produktivnost, kvaliteto in krajše cikle dizajniranja.

Programska oprema Mentor Graphics dopolnjuje obstoječi nabor izdelkov Skupine CADCAM za upravljanje življenjskega cikla izdelka (PLM), tako zagotavlja popolnoma integriran proces elektronskega in mehanskega dizajna, ki občutno zmanjša čas do trga za razvoj novih izdelkov. To razmerje Mentor Graphicsu omogoča  razširiti svoj obseg na trgu Jugovzhodne Evrope in EDMD Solutions strankam ponuditi še boljše rešitve. Kupci tako lahko učinkovito delijo informacije med razvojnimi oddelki in upravljajo z medsebojno povezanimi vidiki elektronske in elektronsko-mehanske življenjske dobe razvoja produkta.

" Vidimo trend v industriji, da podjetja razvijajo vedno bolj zapletene in visokozmogljive elektronske izdelke," je dejal g. Zlatko Šimunec, direktor EDMD Solutions in Skupine CADCAM."  S celotno družino izdelkov Mentor Graphicsa za PCB dizajn, analizo integritete signalov in moči ter CFD toplotne analize, bomo sedaj lahko zadovoljili potrebe celotne industrije, vključno z najbolj naprednimi razvojnimi in proizvodnimi okolji. Zelo smo navdušeni nad to spremembo v naši ponudbi. "

Ta sporazum sovpada z odmikom od dolgoročnega sodelovanja med Skupino CADCAM in Altium, proizvajalcem programske opreme za razvoj tiskanih vezij.

Mentor Graphics je nesporni svetovni lider v orodjih za PCB oblikovanje in analizo, s ponudbo izdelkov usmerjenih na celoten spekter organizacij, za posameznega oblikovalca, za srednje velike projektne skupine, pa vse do globalnih podjetij. 

"EDMD Solutions je dobrodošel dodatek v našo obsežno mrežo distributerjev po vsem svetu," je dejal Ulrich Bruder, vodja globalne distribucije, Focus Products Organization, podjetja Mentor Graphics. "  Zavedamo se, da se z napredno zasnovo izdelka, razkorak med električno in mehansko konstrukcijo ne obstaja več in da bo EDMD Solutions s svojo ponudbo produktov in znanja kupcem ponudil to, kar potrebujejo za bolj učinkovito oblikovanje naprednih izdelkov. "

Mentor Graphics produkti, distribuirani s strani EDMD Solutions vključujejo:

•          PADS® družina orodij za dizajniranje tiskanega vezja
•          HyperLynx® orodje za analizo integritete električnega signala in moči
•          FloTHERM® XT orodje za toplotno analizo
•          FloEFD®CFD(Computational Fluid Dynamics) orodje za računalniško dinamiko tekočin
•          Valor® orodje za preverjanje ustreznosti dizajna PCB pred samo proizvodnjo
 

O EDMD Solutions

EDMD Solutions je 'value-added' prodajalec Mentor Graphics-a in član Skupine CADCAM, vodilnega ponudnika PLM rešitev v jugovzhodni Evropi, ki zagotavlja  'end-to-end' rešitve svetovno vodilnih programskih rešitev za razvoj mehanskih in elektronskih izdelkov ter upravljanje s podatki o izdelkih. Podjetje izvaja tudi storitve implementacije in tehnično podporo. Skupina CADCAM ima izkušeno ekipo svetovalcev, inženirjev in oblikovalcev iz Slovenije, Hrvaške, Italije, Madžarske, Srbije, Bosne in Hercegovine, Bolgarije in Makedonije. Sedež se nahaja v Zagrebu, Stoosova 1.

Spletna stran: http://cadcam-group.eu

O Mentor Graphics

Mentor Graphics (NASDAQ: MENT) je vodilni svetovni ponudnik programske opreme za razvoj elektronike (HW in SW), svetovalne storitve in podporo za svetovno najbolj uspešna podjetja iz dejavnosti elektronike in polprevodniških tehnologij. Ustanovljen je bil leta 1981. Družba se lahko pohvali s letnimi prihodki, ki presegajo 1,24 milijarde dolarjev. Sedež podjetja se nahaja na 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777.

Spletna stran: http://www.mentor.com/.

(Mentor Graphics, FloTHERM, PADS, FloEFD, Valor in HyperLynx so registrirane blagovne znamke korporacije Mentor Graphics. Vsa ostala imena podjetij ali izdelkov so registrirane blagovne znamke ali blagovne znamke njihovih lastnikov.)

Mentor Graphics Signs Agreement with EDMD Solutions to Distribute Electronic Design and Analysis Products

WILSONVILLE, Ore., March 6, 2015 — Mentor Graphics Corporation (NASDAQ: MENT) today announced an agreement with EDMD Solutions, a member of  the CADCAM Group, a leading distributor of electrical and mechanical design and analysis tools in Southeast Europe, to provide PCB design, electrical performance and mechanical analysis products from Mentor Graphics to electronics customers in the region.  These Mentor Graphics® products provide customers with the world’s leading printed circuit board (PCB) design, high-performance analysis, PCB design for manufacturability (DFM) checking, and thermal analysis capabilities. Now EDMD’s customers have access to the capabilities that distinguish the Mentor Graphics portfolio and enable higher design productivity, product quality, and cost and design cycle reduction. 

Mentor Graphics software complements the CADCAM Group’s existing product suite for product lifecycle management (PLM), to deliver a fully integrated electronics and mechanical design process to significantly reduced time-to-market for new product development.  This relationship allows Mentor Graphics to broaden its reach in the Southeast Europe market while allowing EDMD Solutions to deliver improved solutions to its customers.  Customers can then share information, collaborate effectively across the product development disciplines, and manage the interrelated aspects of the electronics and electronic-mechanical lifecycle.

“We see a definite trend in the industry where companies are developing more complex and higher performing electronic products,” stated Zlatko Simunec, CEO at EDMD Solutions and CADCAM Group.  “With the Mentor Graphics full family of PCB design, signal and power integrity, and CFD thermal analysis products we will now be able to meet the needs of the entire industry including the most advanced design and manufacturing environments.  We are very excited about this change in our offerings.”

This agreement marks a departure from CADCAM Group’s long-term relationship with Altium, also a manufacturer of printed circuit board design software.  Mentor Graphics is the undisputed worldwide market leader in PCB design and analysis tools, with product offerings targeted at the full spectrum of organizations from the individual designer, through mid-sized project teams, to large global enterprises. 

“EDMD Solutions is a welcome addition to our extensive network of worldwide distributors,” stated Ulrich Bruder, global distribution manager, Focus Products Organization of Mentor Graphics.  “We understand that for advanced product design, the gap between electrical and mechanical design is becoming non-existent and EDMD Solutions’ product offerings and expertise will provide customers with products they require to design these advanced products more efficiently.”

Mentor Graphics products to be distributed by EDMD Solutions include:

·         PADS® family of PCB design tools

·         HyperLynx® electrical signal, analog and power integrity analysis

·         FloTHERM® XT electronics cooling analysis

·         FloEFD® CFD (Computational Fluid Dynamics) fluid flow and heat transfer analysis

·         Valor® design for PCB manufacturing analysis

About EDMD Solutions

EDMD Solutions is a value-added reseller of Mentor Graphics and a member of CADCAM Group, the leading PLM Solution provider in South-East Europe, providing an end-to-end solution consisting of industry winning software products for mechanical and electronic product development, product data management, implementation services, and technical support. The CADCAM Group has an experienced team of consultants, engineers and designers in Croatia, Italy, Slovenia, Hungary, Serbia, Bosnia and Herzegovina, Bulgaria and Mac­edonia. The headquarters is located in 10000 Zagreb, Stoosova 1, Croatia.
World Wide Web site: http://cadcam-group.eu

About Mentor Graphics

Mentor Graphics Corporation (NASDAQ: MENT) is a world leader in electronic hard­ware and software design solutions, providing products, consulting services and award-winning support for the world’s most successful electronics and semiconductor compa­nies. Established in 1981, the company reported revenues over the last 12 months in excess of $1.24 billion. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/.

(Mentor Graphics, FloTHERM, PADS, FloEFD, Valor and HyperLynx are registered trademarks of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.)