TOS Varnsdorf W 100 A - Horizontal Boring Machine, Table Type

Year: 2024

Diameter of working spindle 100 mm

Travel X-axis 1600 mm

Travel Y-axis 1120 mm

Spindle speed 7 - 1120 /min.

Cooling through spindle NO

Spindle travel - W axis 900 mm

Travel Z-axis 1250 mm

Tool magazine NO

Spindle taper ISO 50 .

Max. load of table 3000 kg

Machine dimensions l x w x h 6710 x 3450 x 3000 mm

Machine weight 14000 kg

Main motor power 11 kW

Total input 17 kVA

Clamping area of table 1250 x 1250 mm

Face plate diameter 600 mm

Max. diameter of face turning 900 mm

The machine is overhauled.

Hand-controlling horizontal borer machine with fixed stand and cross-adjustable table. The machine is in the following version: X, Z, Y ground, traverse milled and undercut, more precisely glued with special material with sliding properties (Turcite, GS-super fluid, etc.), wedges ground and scraped. The worktable surface is grinded and scraped (reinovation of grooves as required). The X and Y axes are equipped with trapezoidal screws with nuts - placed in bearing housings. Headstock - Gearwheel bearings from reputable manufacturers, main place as well as main spindle manufacturing by Fermat, hydraulic tool clamping. Automatic lubrication is controlled centrally through the dispensers - the manufacturer Hytos. The machine has a telescopic covering of X- and Z axes. Machine surface adjustment - varnish according to RAL 5010 (blue – depending on customer´s wish). Electrical switchboard with programmable controller, control panel on headstock. CE cable lines are installed throughout the machine and between the machine and the electrical cabinets. The machine is equipped with digital measuring with linear rulers with accuracy of positioning indication 0.01mm for axes (X, Y, Z, W) including measuring of the round table by rotary sensor (in the center of the table). Optical reading of the angle after complete overhaul.

Lucie Větříšková

email: contact@fermat.cz

Mobil: +420 778 547 838